AND Check Weighing Indicator AD-4404, Инструкция по эксплуатации

Страница: 11 / 162

Page 9
2.2.1. 2.2.1. 2.2.1. 2.2.1. Keys Keys Keys Keys
The START key of the conveyor belt.
The STOP key of the conveyor belt.
The key to select a function of a key.
The key to call the code.
Pressing the
CODE RECALL key to recall the code.
Pressing and holding the SHIFT key, press the CODE SET key to
select the principal codes for display in the sub-display.
The key to move the cursor or scroll the function number.
Pressing and holding the
SHIFT key, press the key to decrease the
code number.
The key to select alphabetical keys, upper keys, lower keys or
numerical keys.
to
,
Alphanumeric keys.
The escape key.
The
ESC key is used to undo the last key action and to return to the
previous mode.
Pressing and holding the
OFF key more than three seconds in
weighing mode, turn off the display (Standby mode).
The ENTER key for parameter settings.
The ON key turns on the display while in standby mode.
Pressing and holding this key, press the key to enter the menu.
Pressing and holding the
TARE key, press the ON key after turning off,
the indicator displays gross value and does not to compensate zero.
Pressing this key, the key works as the F1 key.
Pressing and holding the SHIFT key, press this key, the key works as
the F2 key. Preset the function of the F1 and F2 key at
othef-2
and
othef-3
in the function list.
The key to shut off the buzzer.
Pressing and holding the
SHIFT key, press the CLEAR TOTAL key to
clear the total data of the current code.
Pressing the key, this key works as the TARE key. The tare key is
used to display the net value that subtracts the tare weight from the
gross value.
Pressing and holding the
SHIFT key, press the ZERO key, this key
works as the zero key. The current weighing display becomes zero and
displays sign CZ.