AND Check Weighing Indicator AD-4404, Инструкция по эксплуатации

Страница: 33 / 162

Page 31
6.3. 6.3. 6.3. 6.3. Foreign Matter Detection Foreign Matter Detection Foreign Matter Detection Foreign Matter Detection
The foreign matter detection is the function to reject an article including foreign matter.
The system consists of the AD-4404 and the foreign matter detector.
The rejection is performed with the following procedure.
1 When an article including foreign matter is detected, a signal is transmitted from the
foreign matter detector to a preset I/O control interface terminal of the AD-4404.
2 When the AD-4404 receives the signal, the
Foreign detect timer
[
5q f-58
]
starts.
3 When the timer is up, the current weighing value is ignored. Judgement is regarded
as fault. Rejection signal is transmitted from the AD-4404 to the selector.
4 The article is rejected with the selector.
The function can be used with automatic mode and conveyor stop mode .
Concerning Principal Items
(Including Parameter Example)
Address
Parameter
Address name
Parameter name
Description
1n f-10
9
IN 10(A10) function
Foreign matter detection
Terminal A10 of the I/O interface is used as
detection input.
5q f-58
Foreign detect timer
Delay time that the article moves from the
detector to the weighing conveyor.
Range is 0.00 to 99.99 sec.
5q f- 1
1
or
2
Weighing mode
Automatic mode or Conveyor stop mode
Refer to Automatic mode or Conveyor stop mode for other items
Detecting foreign matter, Signal
is transmitted to AD-4404
Time that the article reaches
to weighing conveyor.
Weighing value is ignored and it is
judged as including foreign matter.
To foreign matter
Foreign matter detector
To preset terminal of I/O interface of AD-4404
Foreign detect timer
5q f-58
Weighing conveyor Leading conveyor Forwarding conveyor
Selector 1
Position sensor
Loadcell