AMX AutoPatch Epica-128, Руководство пользователя

Страница: 114 / 127

BCS Command Table
The following table shows the BCS command characters (keys) that can be used
when executing local presets. For a complete list of the BCS command characters
see the BCS Command Table on page 1-5 .
Key Function Description
R
Execute
Local Preset
Initiates an Execute Local Preset command (also used in the
Execute Global Preset command)
P Local Preset Indicates the number(s) following is a local preset number
L Level Indicates the number(s) following is the level
“ 0 ” - “ 9 ” Number
Identifies level and local preset values; use multiple digits to enter
larger numbers
“ ” Space Separates numbers in entries containing multiple numbers
: Colon
Specifies a range of local preset numbers in entries containing
multiple numbers
T Take Executes a command
X Exit Exits, or cancels, the command being entered
BCS Response Table
The following table shows BCS response characters, with descriptions and
meanings, that may appear instead of an entered character or number (see
page 1-6). If these characters appear, all or part of the command is not executed.
Response Meaning Description
? Format Error Indicates an error in the entry of the command line format
X
General Error Indicates the system rejected all or part of the command
E# Error Indicates an error code number*
W#
Warning Indicates a warning code number*
* For additional information on Error or Warning responses, note the specific
number and see page A-1.
5.2 Global Presets
A global preset is a snapshot of a system’s routing state. The routing state is all
routings on all levels (including audio settings) for all enclosures in a system.
Once the system state has been defined with an “
RR
” Define Global Preset
command, the system state can then be restored at any time with the “
R
” Execute
Global Preset command. Global presets cannot be defined in X
N
Connect.
Note:
We strongly recommend keeping track of the numbers and the system
state routings used for each global preset. If another system state is assigned to a
previously used number, the former state will be automatically overwritten.
BCS Serial Control Protocol 5-3
Local Presets
Executing
P
resets