Unpacking Tips
q
Before fully unpacking the enclosure(s),
examine the shipping box(es) for
any signs of damage.
If a box is partially crushed or any sides have been
broken open, notify the shipping agency immediately and contact your
AMX Representative (see the warranty at www.amx.com or on the CD).
q
Once unpacking is complete, closely check the physical condition of the
enclosure.
q
Keep the enclosure on the pallet for easy maneuverability with a pallet jack
or fork lift until the enclosure is installed.
q
Collect all documentation and envelopes.
Note:
Please save the original shipping container and packing materials. AMX
is not responsible for damage caused by insufficient packing during return
shipment to the factory. Shipping boxes are available; contact your
AMX Representative for details.
1.2 Front of the Enclosure
Enclosures, which are the structural basis of an Epica Distribution Matrix, are
custom built for each installation. Epica enclosures are controlled using control
software or an external controller (see page 1-7). The LEDs indicate status for
power, redundant power supplies (RPS), and communication activity (see
page 6-2).
1-2
Epica-128 & Epica-256 Installation & Setup
Introducing the Epica-128 & Epica-256
In
tr
oduction
Figure 1: Front view of an Epica-128 enclosure and its LEDs
