Product Notes
An Epica Distribution Matrix can stand alone or be linked as part of a larger system,
including any other AMX AutoPatch products that are X
N
Net compatible. The
Epica is available in a variety of input to output configuration sizes and can contain
an assortment of I/O boards in a single enclosure.
Note
: Because the Epica-128 and Epica-256 Distribution Matrices are available in
various board configurations, the illustrations in this manual may differ from the
model(s) you purchased.
Epica enclosures fit in a broad range of audio/video environments and are
controllable from a variety of sources (see page xi).
Epica-256 (25 RU)
– each enclosure holds a maximum of 16 input and 16 output
boards, accommodating connector configurations up to a maximum of 256x256, as
well as subsets (for example 32x192 or 176x160).
Epica-128 (16 RU)
– enclosure holds a maximum of 8 input and 8 output boards,
accommodating connector configurations up to a maximum of 128x128, as well as
subsets (for example 64x80 or 112x96).
Epica Features
q
Ultra-Flat Response Certified
™
(bandpass curve measured at a tight +/-3 dB)
q
Limited Lifetime Warranty (see warranty at www.amx.com or on the CD)
q
24-hour technical support
q
System self-diagnostics
q
Combine multiple video and/or audio signal types in various I/O sizes in the
same enclosure or in the same system via linked enclosures
q
Virtual matrix programming levels allow multiple enclosures to route signals as
a single system or one enclosure to route different sets of signals as multiple
independent systems
q
Switch any input to any or all outputs in any combination and disconnect any
or all outputs
q
Breakaway to route audio, video, or audio-follow-video
q
Groupings
q
Macros, global presets, and local presets
q
Ultra-wideband (300 MHz) video bandwidth in any routing state, including
fully-loaded
Welcome
x
Epica-128 & Epica-256 Instruction Manual Introduction
Welcome
