Ametek 5100P, Руководство пользователя

Страница: 62 / 83

PN 9000-246-VE, Rev D
Zero Calibrating the 5100P Analyzer
To perform a Zero Calibration on the 5100P Analyzer:
1. From the
Setup
screen, click the
Zero
button. The Zero Calibration will be-
gin and the “
Calibration is in progress
" status bar is displayed below the
Calibration
group. Note that the
Span
and
Zero
buttons change to
Accept
zero
and
Cancel zero
.
2. If you click the
Accept zero
button, the Zero Calibration will stop and the
analyzer will accept the Zero Calibration. If you click the
Cancel zero
but-
ton, the Zero Calibration will stop and the analyzer will not accept the Zero
Calibration.
Figure 3-21.3.
Zero Calibrating the 5100P,
Setup screen.
3-34 | 5100P TDLAS Analyzer