Ametek 5100P, Руководство пользователя

Страница: 42 / 83

PN 9000-246-VE, Rev D
Setting the Sample Log Time
The 5100P maintains an internal Data Log, which can be downloaded from the
instrument using the 5100P Application Software (see “Communicating With
the 5100P TDLAS Analyzer Via the 5100P Application Software” in this chapter).
A maximum of 1440 data points can be maintained in the log. With the default
logging interval of one (1) minute, the 5100P can internally store 24 hours of
data. After 24 hours (1440 data points), the instrument starts to overwrite the
oldest data points, leaving only the most recent 1440 data points maintained
in memory. Longer data logging intervals can be set by the user.
To change the Sample Log duration:
1. From the CONFIG menu, use the Up or Down arrow keys to select Sample
Log Time . Press Enter to enable Edit mode. The current Sample Log Time
(minutes) is displayed and you will be prompted with “ NEW? _ ”.
2. Use the Numeric keys to enter the new value (in minutes). Press Enter to
return to the CONFIG menu. Note that the Sample Log Time interval must
be a whole number between 1–1000 ; do not use a fraction or decimal).
Figure 3-11.
Configure Sample Log Time
screen.
CONFIG
SAMPLE LOG TIME
1
NEW? _
3-14 | 5100P TDLAS Analyzer