Ametek 5100P, Руководство пользователя

Страница: 43 / 83

PN 9000-246-VE, Rev D
Communicating With the 5100P TDLAS Analyzer Via the 5100P
Application Software
The PC-based 5100P Application Software (standard with each unit) provides
enhanced functionality over the 5100P User Interface, and can be used to
communicate with the analyzer via a desktop or laptop computer. The PC-to-
analyzer connection is via a USB cable (Type B).
Install the Application Software prior to connecting the 5100P to your computer.
Installing the 5100P Application Software
If there are prior versions of the 5100P Application Software on your
PC, they must be uninstalled before installing a new version.
To install the 5100P Application Software on your computer:
1. Locate the USB drive supplied with the 5100P TDLAS Analyzer and insert it
in a USB port on the computer that will be used to connect to the 5100P.
2. Navigate to the USB drive/device and click it to open it. Save the files to a
folder on the PC's hard drive. For example, create an AMETEK Software
folder in the PC's C:\Temp folder and save the 5100P Application Software
files to that folder.
3. Navigate to folder with the 5100P Application Software files, and double-
click the 5100P.exe (Application) file to start the installation.
The
Set Path and Licences terms and conditions
screen is displayed
(Figure 3-12). By default the software will install the 5100P Application
Software on your computer's C drive in the following location:
C:\Program Files (x86)\AMETEK INC\AMETEK 5100P\
If you wish to install the Application Software in a different folder, click the
Browse button ( " ... " ) and navigate to the desired folder. Or create a differ-
ent folder first, then click the Browse button and navigate to that folder.

The 5100P Application
Software requires 36 MB to
install.
User Interface/5100P Application Software
|
3-15