Ametek 5100P, Руководство пользователя

Страница: 30 / 83

PN 9000-246-VE, Rev D
Communicating With the 5100P TDLAS Analyzer Via the User
Interface Panel
To perform basic functions on the AMETEK 5100P TDLAS Analyzer, such as
setting
Concentration Alarm high and low setpoints or configuring various
system parameters, you can work directly from the analyzer’s User Interface.
Introduction to the User Interface Panel
The 5100P User Interface consists of two areas:
• A 20-character by 4-line LCD display with white LED backlight. The display
allows you to view the live value of the analyte being measured, perform
basic setup functions, and to log data.
• A 19-key keypad (which includes the Power On/Off key). The keypad con-
sists of the following keys:
Key Description
0–9 Use the Numeric keys 0–9 to enter numerical data.
•
Use the Decimal (‘
•
’) key to enter a decimal character.
– Use the Minus (‘ – ’) key to enter a negative number.
Arrows Use the Arrow keys to view Sub-Menu items from the Main Menu and to
navigate on screens to select parameters that you wish to change.
Press the Enter (‘ ’) key to access the Main Menu, Sub-Menu items
(when it is selected), and the parameters within the sub-menus. Also,
press the Enter key to save any changes you make to Concentration
Alarm and other system Configuration operating parameters.
Esc
Press the
Escape
key to discard any changes you make to operating
parameters,
but only before they have been saved
. Also, press
Escape
to back out of the sub-menus and return to the
HOME
screen.
Press the Power On/Off key to Power Up/Power Down the 5100P
Analyzer.
Arrow Keys
Escape Key
Enter Key
On/Off Key
Figure 3-1.
5100P TDLAS Analyzer
User Interface Panel.
3-2 | 5100P TDLAS Analyzer