Ametek 5100P, Руководство пользователя

Страница: 41 / 83

PN 9000-246-VE, Rev D
Changing the Backlight Time
To help extend the 5100P Analyzer's battery life, the backlight display can be
set to turn Off automatically after a time-delay following any use of the key-
pad.
To change the display backlighting duration:
1. From the
CONFIG
menu, use the
Up
or
Down
arrow keys to select
Back-
light Time
. Press
Enter
to enable Edit mode. The current
Backlight Time
(seconds) is displayed and you will be prompted with “
NEW? _
”.
2. Use the
Numeric
keys to enter the new value (in seconds). Press
Enter
to return to the
CONFIG
menu. Note that the duration setting must be a
whole number (e.g., 6, 12, 15, etc.); do not use a fraction or decimal).
Important information about backlighting:
• To disable the Backlight Timer, enter a value of zero (‘
0
’). The display’s back-
light will remain On.
• The maximum time that can be set is 600 seconds.
Figure 3-10.
Configure Backlight screen.
CONFIG
BACKLIGHT TIME
120
NEW? _
User Interface/5100P Application Software
|
3-13