Ametek 13500CS/3, Руководство пользователя

Страница: 38 / 111

User Manual – Rev J CS Series
California Instruments 38
3.6.1 AC Input Connector – INPUT (TB3)
See section 3.4 for details on connecting AC input power. Labeled INPUT on CS models.
INPUT. Designator
CS Series Direction Connection
Description
1 ØA Input AC Line
2 ØB Input AC Line
3 ØC Input AC Line
4 GND Chassis Ground
Table 3-3: AC Input Terminal Block Connection Description
3.6.2 SMA Connectors
SMA connectors. Functions are called out on rear panel decal. Table 3-4 shows connections
from left to right when standing at the rear of the CS cabinet. SMA connectors are small high
frequency capable coax connectors that can be screwed down securely to prevent signal loss.
Adaptor for SMA to BNC conversion are readily available.
To connect these signals using more conventional BNC cables, SMA Male to BNC Female
adapters may be used. These are available from
www.pasternack.com , P/N PE9074.
PE9074 Adaptor.
SMA Description
FLT Discrete Fault Indicator output. Isolated Open Collector. Can be used to signal external
devices when a fault condition is detected.
INH Remote Inhibit. (TTL input)
FSTB Function Strobe / Trigger Output (TTL output)
TRIG Trigger Input (TTL input)
RPV(N/A) Remote programming voltage. DC voltage input 0 to +10 VDC for 0 to full-scale output
voltage programming.(RPV option)
Table 3-4: SMA Connectors – CS Series
3.6.3 BNC Connectors (-LKM / -LKS options)
BNC connectors. Functions are called out on rear panel decal. Table 3-5 shows connections for
the optional -LKM and -LKS clock and lock mode. Refer to section 3.9 for more details.
BNC
CS Series
Ref.
Description
CLOCK J1 Clock Option (TTL output on Master / TTL input on Auxiliary) N/A
LOCK J2 Lock Option (TTL output on Master / TTL input on Auxiliary) N/A