4. Configuration
191
o
DATE AND TIME – CPU Date and Time configured(E.g..: 2001.01.31 00:00)
CPU’s Menu language switch:
o
PORTUGUES – Switch to Portuguese idiom
o
ENGLISH – Switch to English idiom
o
ESPANOL – Switch to Spanish idiom
Device’s Network information resources :
o
NET 1 IP ADDRESS– IP Address (E.g..: 192.168.0.1)
o
NET 1 MASK – Subnetwork Mask (E.g..: 255.255.255.0)
o
NET 2 IP ADDRESS– IP Address(E.g..: 192.168.1.1)
o
NET 2 MASK– Subnetwork Mask (E.g..: 255.255.255.0)
o
NET 3: DISABLED. (If it is not in use in user’s application)
o
NET 4: DISABLED. (If it is not in use in user’s application)
o
NET 5: DISABLED. (If it is not in use in user’s application)
o
NET 6: DISABLED. (If it is not in use in user’s application)
Software information resources:
o
FIRMWARE – CPU’s software version (E.g..: 1.0.0.0)
o
BOOTLOADER – CPU’s Bootloader version (E.g..: 1.0.0.0)
o
PROC. AUX. – CPU’s auxiliary processor version (E.g..: 1.0.0.0)
CPU’s redundancy menu access:
o
SWITCH TO ACTIVE ?
o
SWITCH TO STANDBY ?
Memory Card’s data access:
o
MEMORY CARD>CPU – Project transference from memory card to CPU
o
CPU>MEMORY CARD – Project transference from CPU to memory card
o
FORMAT – Formats the memory card to FAT32 system
o
UNMOUNT – Enables the secure removal of memory card
o
BACKUP – Does a CPU’s data backup on memory card
The Figure 4-59describes an example of how to operate Hadron Xtorm CPU’s menu, through CPU’s
adjust contrast procedure in Status in screen. In addition to turn easier the configuration, it’s possible
to identify all levels and each type of pressing to navigate between them, to modify other parameters,
as Language and insert the password (s) of Memory Card, just following the same access rules. The
short pressing shows that the contrast is being increased (lighter), in the next button press after reach
the maximum value it turn to the minimum value (darker). The long pressing shows the confirmation
of the desired contrast and the return to the previous level.
