manualshive.com logo in svg

Akai RE32, Руководство оператора

"Акай RE32 - это мощный рэки-рекордер с 32 каналами. Получите операторское руководство бесплатно, загрузив его с manualshive.com. Этот мануал поможет вам освоить все возможности устройства и настроить его эффективное использование. Не упустите шанс улучшить ваше аудио-оборудование с Akai RE32!"

Поделиться
Скачать
background image

Version 1.00

61

EDITING

EDITING

In this section we will be looking at editing on the RE32. Before looking at the edit operations in
detail, we will first describe the functions of some of the keys associated with editing in general.

EDIT KEY

Pressing the EDIT key will display the main edit page. The IN, SYNC and OUT times are shown as
is the IN/OUT length.

The  ‘soft’ keys F1-F6 are used to select the available edit functions which change according to the
edit mode selected. Sometimes these are used to go to other pages or call other functions,
sometimes they are ‘action’ keys that perform specific functions. We will look at more of their
functions during the course of this section.

EXIT KEY

The EXIT key is a ‘cancel’ or ‘abort’ key and will take you out of any situation without committing it.

UNDO KEY

The RE32 offers multi-level undo allowing you ‘repair’ an edit should you make a mistake. To undo
a mistake, simply press UNDO. If you have been experimenting with something and have carried
out a series of edits, you may undo them sequentially by repeatedly pressing UNDO.

REDO (SHIFT+UNDO)

If you undo something and wish to revert back to the previous version, pressing SHIFT+UNDO
(REDO) will redo the undo. In the event of you undoing a few steps, pressing REDO several times
will sequentially undo the undos.

EXECUTE KEY

Most editing functions on the RE32 are completed using EXECUTE. In an action where it necessary
to press EXECUTE to complete it, the key’s LED will flash and you should press EXECUTE to
complete the action. Whenever this LED is flashing, EXIT will always abort the action without
committing it.

IN KEY

This key allows you to mark an IN time for an edit. When you mark an IN time, a vertical green line
is shown on the monitor and the IN TIME is shown on the LCD. This indicates the start of an edit.

SYNC KEY

This allows you to mark a sync point in an edit or a cue and this can be used for syncing up
material with other aural or visual events. For example, it could be used to precisely back-time a
reverse reverb effect to end at a specific point in a drum part on another track. When you mark a
SYNC point, a yellow vertical line is shown on the monitor. The time is also shown on the LCD.

OUT KEY

This allows you to mark an OUT time for an edit. When you mark an OUT time, a green vertical line
is shown on the monitor showing you the position of the OUT time. The OUT time is also shown on
the LCD. When an edit region is marked in this way, the area in between the IN and OUT marks is
highlighted green and the waveform (if selected for display) is shown in black on the monitor on
the track(s) selected for EDIT. The IN to OUT length is shown on the LCD. This region may now be
subjected to the editing functions on the RE32 such as COPY, CUT, NUDGE, etc..

Содержание RE32

































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RE32

jbc DI Series Manual preview
DI Series
Бренд: jbc Страницы: 4
QUAD 33 Instruction Book preview
33
Бренд: QUAD Страницы: 16
Fairchild 63 Installation, Operation And Maintenance Instructions preview
63
Бренд: Fairchild Страницы: 2
Fagor 101 Operating Manual preview
101
Бренд: Fagor Страницы: 103
3M PX5 Series Reference Manual preview
PX5 Series
Бренд: 3M Страницы: 34
Jetline 9600 Series Operation Manual preview
9600 Series
Бренд: Jetline Страницы: 58
Saga SAGA1-L40 User Manual preview
SAGA1-L40
Бренд: Saga Страницы: 9
Kärcher K 3 How To Connect preview
K 3
Бренд: Kärcher Страницы: 4
Lamtec BT300 BurnerTronic Quick Reference preview
BT300 BurnerTronic
Бренд: Lamtec Страницы: 48
Parkside PDWE 8 A2 Operation And Safety Notes Translation Of The Original Instructions preview
PDWE 8 A2
Бренд: Parkside Страницы: 65
Viva VRM2 Instruction Manual preview
VRM2
Бренд: Viva Страницы: 9
Variotech ENA3 Manual preview
ENA3
Бренд: Variotech Страницы: 24
Watts Ames Colt Series Quick Start Manual preview
Ames Colt Series
Бренд: Watts Страницы: 8
CAME ZBX74-78 Spare Parts preview
ZBX74-78
Бренд: CAME Страницы: 40
Bucher Hydraulics LRV-1 Installation And Startup Manual preview
LRV-1
Бренд: Bucher Hydraulics Страницы: 86
Nustart NU4500R User Manual preview
NU4500R
Бренд: Nustart Страницы: 12
TE Connectivity AMP 3K/40 CE 2161600-1 Original Instructions Manual preview
AMP 3K/40 CE 2161600-1
Бренд: TE Connectivity Страницы: 29
Parker ACR1505 Hardware Installation preview
ACR1505
Бренд: Parker Страницы: 64

Бренды по названию

Популярные бренды

Загрузить еще бренды