Version 1.00
15
INTRODUCTION
NAVIGATING THE RE32
Getting around the RE32 is quite straightforward. Dedicated keys for most commonly used functions
reduces the need for multi-menu operation. Less day-to-day functions are kept hidden away out of
harms way but are still readily accessible.
The external monitor is used purely for referencing your work to see what is going on. You can
think of it as an animated track sheet. In theory, the RE32 could be used without it as most work is
done from the RE32’s front panel LCD.
The keys we will look at in this section are highlighted in the above diagram although others may
be referred to where necessary.
CURSOR KEYS
You use the four CURSOR keys to move around the LCD. In the following example, the page is
displaying a list of files and the CURSOR keys are used to scroll up and down the list in order to
select one.
You can also, in this example, move the cursor to the top line to select a different disk. Disk
selection would be made using the DATA ENTRY +/- keys or by typing in a number directly from
the numeric keypad.
NOTE: The two arrows shown in this example indicate that there are files ‘above’ and ‘below’
the screen which may be accessed by scrolling up or down. This is a convention used in all
file-lists in the RE32 (for example, when loading PROJECTS etc.). If the arrows don’t appear,
there are no files ‘off-screen’.
The cursor keys are ‘accelerators’ - that is, they move faster the longer you hold them so scrolling
through long lists of files or parameters is very fast.
Содержание RE32
Страница 10: ...Page ix ...
