manualshive.com logo in svg

Akai RE32, Руководство оператора

"Акай RE32 - это мощный рэки-рекордер с 32 каналами. Получите операторское руководство бесплатно, загрузив его с manualshive.com. Этот мануал поможет вам освоить все возможности устройства и настроить его эффективное использование. Не упустите шанс улучшить ваше аудио-оборудование с Akai RE32!"

Поделиться
Скачать
background image

Page v

WARRANTY

AKAI professional M.I. Corp. warrants its products, when purchased from an authorized AKAI professional
dealer, to be free from defects in materials and workmanship for a period of 12 (twelve) months from the date
of purchase. Warranty service is effective and available to the original purchaser only, and only on completion
and return of the AKAI professional Warranty Registration Card within 14 days of purchase.

Warranty coverage is valid for factory-authorized updates to AKAI professional instruments and their software,
when their installation is performed by an authorized AKAI professional Service Centre, and a properly
completed Warranty Registration has been returned to your AKAI professional dealer.

To obtain service under this warranty, the product must, on discovery of the defect, be properly packed and
shipped to the nearest AKAI professional Service Centre. The party requesting warranty service must provide
proof of original ownership and date of purchase of the product.

If the warranty is valid, AKAI professional will, without charge for parts or labour, either repair or replace the
defective part(s). Without a valid warranty, the entire cost of the repair (parts and labour) is the responsibility

of the product’s owner.

AKAI professional warrants that it will make all necessary adjustments, repairs and replacements at no cost
to the original owner within 12 (twelve) months of the purchase date if:

1

The product fails to perform its specified functions due to failure of one or more of its components.

2

The product fails to perform its specified functions due to defects in workmanship.

3

The product has been maintained and operated by the owner in strict accordance with the written
instructions for proper maintenance and use as specified in this Operator’s Manual.

Before purchase and use, owners should determine the suitability of the product for their intended use, and
the owner assumes all risk and liability whatsoever in connection therewith.  AKAI professional shall not be
liable for any injury, loss or damage, direct or consequential, arising out of the use, or inability to use the
product.

The warranty provides only those benefits specified, and does not cover defects or repairs needed as a result
of acts beyond the control of AKAI professional, including, but not limited to:

1

Damage caused by abuse, accident or negligence.  AKAI professional will not cover under warranty any
original factory disk damaged or destroyed as a result of the owner’s mishandling.

2

Damage caused by any tampering, alteration or modification of the product: operating software,
mechanical or electronic components.

3

Damage caused by failure to maintain and operate the product in strict accordance with the written
instructions for proper maintenance and use as specified in this Operator’s Manual.

4

Damage caused by repairs or attempted repairs by unauthorized persons.

5

Damage caused by fire, smoke, falling objects, water or other liquids, or natural events such as rain,
floods, earthquakes, lightning, tornadoes, storms, etc.

6

Damage caused by operation on improper voltages.

IMPORTANT NOTE:   This warranty becomes void if the product or its software is electronically modified,
altered or tampered with in any way.

AKAI professional shall not be liable for costs involved in packing or preparing the product for shipping, with
regard to time, labour or materials, shipping or freight costs, or time and expenses involved in transporting
the product to and from an AKAI professional Authorized Service Centre or Authorized Dealer.

AKAI professional will not cover under warranty an apparent malfunction that is determined to be user error,
or the owner’s inability to use the product.

THE DURATION OF ANY OTHER WARRANTIES, WHETHER IMPLIED OR EXPRESS, INCLUDING BUT
NOT LIMITED TO THE IMPLIED CONDITION OF MERCHANTABILITY, IS LIMITED TO THE DURATION
OF THE EXPRESS WARRANTY HEREIN.

AKAI professional hereby excludes incidental or consequential damages, including but not limited to:

1

Loss of time

2

Inconvenience

3

Delay in performance of the Warranty

4

The loss of use of the product

5

Commercial loss

6

Breach of any express or implied warranty, including the lmplied Warranty of Merchantability, applicable
to this product

Содержание RE32

































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RE32

Bang & Olufsen Beolink 1000 Service Manual preview
Beolink 1000
Бренд: Bang & Olufsen Страницы: 9
Bang & Olufsen Beolink 1000 User Manual preview
Beolink 1000
Бренд: Bang & Olufsen Страницы: 12
Hach SC1500 User Manual preview
SC1500
Бренд: Hach Страницы: 86
Acclaim Lighting Canvas User Manual preview
Canvas
Бренд: Acclaim Lighting Страницы: 32
Danfoss VLT AutomationDrive FC 302 Installation Manual preview
VLT AutomationDrive FC 302
Бренд: Danfoss Страницы: 128
Danfoss VLT DriveMotor FCP 106 Installation Instructions preview
VLT DriveMotor FCP 106
Бренд: Danfoss Страницы: 4
Rane DR1 Dimensions And Specifications preview
DR1
Бренд: Rane Страницы: 2
National Instruments PXI-6683 Series Installation Manual preview
PXI-6683 Series
Бренд: National Instruments Страницы: 4
National Instruments NI R Series User Manual preview
NI R Series
Бренд: National Instruments Страницы: 9
National Instruments NI 9474 Getting Started preview
NI 9474
Бренд: National Instruments Страницы: 11
National Instruments NI 9401 Operating Instructions And Specifications preview
NI 9401
Бренд: National Instruments Страницы: 29
National Instruments NI 9214 Manual preview
NI 9214
Бренд: National Instruments Страницы: 11
National Instruments NI-488.2 Getting Started preview
NI-488.2
Бренд: National Instruments Страницы: 7
National Instruments FIELDPOINT FP-1600 Quick Start Manual preview
FIELDPOINT FP-1600
Бренд: National Instruments Страницы: 21
National Instruments FieldPoint FP-1001 User Manual preview
FieldPoint FP-1001
Бренд: National Instruments Страницы: 65
National Instruments FieldPoint FP-1001 Quick Start Manual preview
FieldPoint FP-1001
Бренд: National Instruments Страницы: 19
National Instruments GPIB-SCSI-A Installation Manual preview
GPIB-SCSI-A
Бренд: National Instruments Страницы: 16
National Instruments NI 9209 Calibration Procedure preview
NI 9209
Бренд: National Instruments Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды