manualshive.com logo in svg

Akai RE32, Руководство оператора

"Акай RE32 - это мощный рэки-рекордер с 32 каналами. Получите операторское руководство бесплатно, загрузив его с manualshive.com. Этот мануал поможет вам освоить все возможности устройства и настроить его эффективное использование. Не упустите шанс улучшить ваше аудио-оборудование с Akai RE32!"

Поделиться
Скачать
background image

46

Version 1.00

RECORDING

AUTO PUNCH-IN/OUT

So far, we have seen how to drop in and out of record manually. It is also possible to automate this
using the AUTO-PUNCH key .

The AUTO IN and OUT times are set using the IN and OUT keys. Switching AUTO-PUNCH to ON
(i.e. LED lit) will activate the auto punch-in/out function.

To use the AUTO function, locate to a point before the IN time, select a track (or tracks) for record
and press PLAY and RECORD together. The RECORD track select key will flash as will the transport
keys’ REC key as the connected machine(s) play up to the IN time. When the IN time is reached,
they will automatically drop in to record and will drop out when the OUT time is reached.

NOTE: One feature of the RE32 is that, because the IN and OUT times are automatically
marked at the start and end of a new recording, once you have performed a recording manually,
to re-create that time and time again (for example, if you need to keep re-taking the same
recording over and over again), you can simply switch AUTO -PUNCH on and the system will
then repeatedly punch-in and out automatically at those points.

If the DESTRUCTIVE mode of recording is enabled under these circumstances, old recordings
will automatically be deleted from the disk thus preventing the build up of unwanted, useless
recordings.

REHEARSE

When the REHEARSE key is switched on, the RE32 will ‘pretend’ to punch in and out but no audio
will be recorded allowing you to rehearse a punch in/out prior to actually doing it.

Содержание RE32

































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RE32

Balmar Max Charge MC-624 Installation And Operator'S Manual preview
Max Charge MC-624
Бренд: Balmar Страницы: 8
Balmar MAX CHARGE MC-614 Installation And Operation Manual preview
MAX CHARGE MC-614
Бренд: Balmar Страницы: 20
Garmin G1000 NXi Cockpit Reference Manual preview
G1000 NXi
Бренд: Garmin Страницы: 220
Gardena 1251 Operator'S Manual preview
1251
Бренд: Gardena Страницы: 16
IFM Electronic Ecomot300 AC2630 Supplementary Device Manual preview
Ecomot300 AC2630
Бренд: IFM Electronic Страницы: 111
K9Safety K9Caller Configuration Manual preview
K9Caller
Бренд: K9Safety Страницы: 9
National Instruments PXI-6683 Series Installation Manual preview
PXI-6683 Series
Бренд: National Instruments Страницы: 4
National Instruments NI R Series User Manual preview
NI R Series
Бренд: National Instruments Страницы: 9
National Instruments NI 9474 Getting Started preview
NI 9474
Бренд: National Instruments Страницы: 11
National Instruments NI 9401 Operating Instructions And Specifications preview
NI 9401
Бренд: National Instruments Страницы: 29
National Instruments NI 9214 Manual preview
NI 9214
Бренд: National Instruments Страницы: 11
National Instruments NI-488.2 Getting Started preview
NI-488.2
Бренд: National Instruments Страницы: 7
National Instruments FIELDPOINT FP-1600 Quick Start Manual preview
FIELDPOINT FP-1600
Бренд: National Instruments Страницы: 21
National Instruments FieldPoint FP-1001 User Manual preview
FieldPoint FP-1001
Бренд: National Instruments Страницы: 65
National Instruments FieldPoint FP-1001 Quick Start Manual preview
FieldPoint FP-1001
Бренд: National Instruments Страницы: 19
National Instruments GPIB-SCSI-A Installation Manual preview
GPIB-SCSI-A
Бренд: National Instruments Страницы: 16
National Instruments NI 9209 Calibration Procedure preview
NI 9209
Бренд: National Instruments Страницы: 10
Talgil DREAM 2 Manual preview
DREAM 2
Бренд: Talgil Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды