Agilent Technologies BenchCel, Руководство пользователя

Страница: 72 / 196

3 Installing BenchCel Microplate Handler
Installing the shield
62
BenchCel Microplate Handler User Guide
Procedure
To install the safety shield:
1
Place the safety shield on the front of the BenchCel Microplate Handler centered
between the pair of stackers. The ledge of the shield should sit on the top of the
device.
2
Insert the four M5 screws into the shield.
Figure
Safety shield on BenchCel Microplate Handler with two stackers (top view)
3
Tighten the screws using the M3 hex wrench.
4
Repeat steps 1 to 3 for each pair of stackers on the BenchCel Microplate Handler.
Related information
Top view - back
Insert screws
For more information about… See…
Safety shield description “Hardware overview” on page 15
Safety information “Safety guidelines” on page 1
Installing the BenchCel Microplate
Handler “Installation workflow” on page 36
Setting up the BenchCel Microplate
Handler “Setup workflow” on page 64
Operating the BenchCel Microplate
Handler “Workflow for operating the BenchCel
Microplate Handler” on page 116