79
4 Setting up the BenchCel device
Creating profiles
BenchCel Microplate Handler User Guide
Note:
The default teachpoint file name is Teachpoints_<profilename>.xml,
where <profilename> is the name of the profile.
c
Append the teachpoint file name with the word
backup
, and then click
Save
.
Note:
The Teachpoint File area displays the file storage location.
VWorks Plus only
. If an audit trail is being logged for records in the development
state, the Audit Comment dialog box opens. Select or type the audit comment, and
then click
OK
.
9
In the Teachpoint File area, click
, and in the
Select a Teachpoint File
dialog
box, locate and select your original teachpoint file, and then click
Open.
You will edit the teachpoints in this file in another procedure.
CAUTION
If the teachpoint file was copied from another computer, you must verify the
teachpoints for the new profile before using the profile.
