manualshive.com logo in svg

Agilent Technologies 1260 Infinity II Series, Руководство пользователя

Поделиться
Скачать
Agilent Technologies 1260 Infinity II Series Скачать руководство пользователя страница 161

Agilent InfinityLab LC Series Vialsamplers User Manual

161

Troubleshooting and Diagnostics

7

Agilent Lab Advisor Software

Agilent Lab Advisor Software

The Agilent Lab Advisor Software is a standalone product that can be used 
with or without a chromatographic data system. Agilent Lab Advisor helps to 
manage the lab for high-quality chromatographic results by providing a 
detailed system overview of all connected analytical instruments with 
instrument status, Early Maintenance Feedback counters (EMF), instrument 
configuration information, and diagnostic tests. By the push of a button, a 
detailed diagnostic report can be generated. Upon request, the user can send 
this report to Agilent for a significantly improved troubleshooting and repair 
process.

The Agilent Lab Advisor software is available in two versions:

•

Lab Advisor Basic

•

Lab Advisor Advanced

Lab Advisor Basic is included with every Agilent 1200 Infinity Series and 
Agilent InfinityLab LC Series instrument.

The Lab Advisor Advanced features can be unlocked by purchasing a license 
key, and include real-time monitoring of instrument actuals, all various 
instrument signals, and state machines. In addition, all diagnostic test results, 
calibration results, and acquired signal data can be uploaded to a shared 
network folder. The Review Client included in Lab Advisor Advanced allows to 
load and examine the uploaded data no matter on which instrument it was 
generated. This makes Data Sharing an ideal tool for internal support groups 
and users who want to track the instrument history of their analytical 
systems.

The optional Agilent Maintenance Wizard Add-on provides an easy-to-use, 
step-by-step multimedia guide for performing preventive maintenance on 
Agilent 1200 Infinity and Agilent InfinityLab LC Series instrument.

The tests and diagnostic features that are provided by the Agilent Lab Advisor 
software may differ from the descriptions in this manual. For details, refer to 
the Agilent Lab Advisor software help files.

Содержание 1260 Infinity II Series







































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды