R3765/67G Series Network Analyzer Operation Manual
7.4 RESPONSE Block
7-14
7.4.2
Display Data Format
Formats the measurement data. Data is displayed as the type formatted.
The Setting and the Explanation
Press the [FORMAT] to call the format menu. (Refer to section A.4.)
Format menu
•
Format menu (1 of 2)
{LOG MAG}
: Sets to the logarithmic magnitude display.
{PHASE}
: Sets to the phase display.
The display is changed to the loop back display in
±
180°.
{DELAY}
: Sets to the group delay display.
{SMITH (R+jX)}
: Sets to the Smith chart.
{SMITH (G+jB)}
: Sets to the admittance chart.
{POLAR}
: Sets to the polar coordinates display.
{LIN MAG}
: Sets to the linear magnitude.
•
Format menu (2 of 2)
{SWR}
: Sets to the SWR (standing wave ratio) display.
{REAL}
: Sets to the measurement data real display.
{IMAG}
: Sets to the measurement data imaginary display.
{PHASE -
∞
, +
∞
}
: Sets to the continuous phase display.
The phase is changed to the no loopback display in
±
180
°
based on the one point data.
{LOG MAG & PHASE} : Sets to the simultaneous display with logarithmic
magnitude and phase.
{LOG MAG & DELAY} : Sets to the simultaneous display with logarithmic
magnitude and group delay.
{LIN MAG & PHASE}
: Sets to the simultaneous display with linear magnitude
and phase.
1
2
