Adaptec MAN-00005-UG, Инструкция по установке и эксплуатации

Страница: 97 / 237

98 Spheras Storage Director Installation and User Guide
Figure 67 Host/LUN Mapping Tab: Custom LUN Mapping Dialog Box
The custom LUN Mapping dialog box allows you to manage host access to a logical drive/LUN number. Use the
assigned LUN drop-down box to select the LUN number for a particular logical drive column. Then use the check boxes
at the intersection of each logical drive column Figure 67 Host/LUN Mapping Tab: Custom LUN Mapping Dialog Box
on page 98 and host row to allow or deny host access. Select the All hosts allowed checkbox to give all hosts access to
that logical drive/LUN. The individual host check boxes are disabled when the All hosts allowed checkbox is selected.
Select the following limits:
Controller Slot Port: Select the controller slot and port number to configure. Valid values depend on the mode of
the controller and the topology setting.
Host Identifier Type: Select the way you would like the information displayed; select host name, or WWN from
the drop down list.
Host Status: Displays the capability of a host to communicate with the controller.
Connected: Host is connected to the controller (logged on to the loop or on the same bus).
Not Connected: Host is not connected to the controller (Not logged on to the loop or on the same bus).
Identifier: Displays the LUN mapping identifiers that you can customize.
LUN Selection: Select available LUNs in the range of 0-255. LUNs already assigned to other logical drives
mapped to the selected host are not displayed.
When you are done configuring all of your logical drives, click Next or the Summary tab to continue your configuration.