Adaptec MAN-00005-UG Скачать руководство пользователя страница 116

Страница: 116 / 237

117

Figure 86

Select Array Properties

•

The most severe status of any logical drive in the array.

•

The number of physical drives in the array.

•

The number of logical drives in the array.

•

The total capacity of the array.

•

The total amount of used and unused space held by this array.

6.5

Physical Disk and Logical Drive Monitoring

This section describes how Spheras Storage Director monitors physical disks and logical drives.

6.5.1

Displaying Physical Drive Information

There are two ways to view physical drive information:

•

Select Physical Drives, Configured, Unused or Global Hot Spares from the navigation area and view the
information in the content area

•

Click on a physical drive in the content area and then click

Physical-> Properties

from the menu bar.

Содержание MAN-00005-UG














































































































































































































































Результаты поиска

Содержание MAN-00005-UG

Отзывы:

Похожие инструкции для MAN-00005-UG

Бренды по названию

Популярные бренды

Adaptec MAN-00005-UG, Инструкция по установке и эксплуатации

Результаты поиска

Содержание MAN-00005-UG

Отзывы:

Похожие инструкции для MAN-00005-UG

Бренды по названию

Популярные бренды