Adaptec MAN-00005-UG, Инструкция по установке и эксплуатации

Страница: 114 / 237

© 2003, Adaptec, Inc.
115
To get information about all controllers that are connected to a particular server, click on Controllers in the navigation
area. This view displays the following information in the content area:
•
The name of each controller.
•
The model of each controller.
•
The mode of each controller: simplex, duplex, or failover.
•
The mode of the cache: normal or conservative cache.
•
The status of each controller (determined by the most severe status of the controller itself or its components).
•
The bus type of each controller: SCSI or Fibre.
If you are displaying the information using the Physical View, you can view controller information in the Controller
Status pane. See 5.3 Setting and Modifying Controller Properties on page 73 for information regarding the controller
summary and status.
6.4 Monitoring an Array
This section describes how Spheras Storage Director monitors the capacity of an array.
To see a summary of the status of all arrays associated with a controller, click on Arrays in the navigation area. The
following information is displayed in the content area:
•
The name of each array.
•
The capacity of each array.
•
The unused capacity of each array.
•
The status of each array. The status that is reported is determined by the most severe status of the array itself or all
its logical drives. The logical drive status is the most severe status of the logical drive itself (for example,
rebuilding) and that of its component physical drives (for example, physical drive failed).
•
The number of logical drives in each array.
•
The number of physical drives in each array.
To monitor activities on an individual array, select an array from the navigation area. There are two ways to view array
information.
•
Select an array and view the information in the content area
•
Click Array-> Properties from the menu bar.