Adaptec MAN-00005-UG, Инструкция по установке и эксплуатации

Страница: 176 / 237

© 2003, Adaptec, Inc.
177
805 Name MLXEV_CFG_COD_IMPORT_FAILED
Description Configuration on disk import failed.
Cause
The controller could not import the configuration.
Action None
Address ctl: 0
Severity 3 (Warning)
Source ExP_old
806 Name MLXEV_DEBUG_DUMP_GENERATED
Description A debug dump exists on this system.
Cause
The controller aborted and created debug dump information.
Action Contact field support for assistance in retrieving the data.
Address ctl: 0 abort code: 0x1314
Severity 4 (Information)
Source ExPro
807 Name MLXEV_DEBUG_DUMP_GENERATED_PARTNER
Description A debug dump exists on this system.
Cause
The partner controller aborted and created debug dump information.
Action Contact field support for assistance in retrieving the data.
Address ctl: 0 abort code: 0x1314
Severity 4 (Information)
Source ExPro
808 Name MLXEV_CFG_COD_NOT_FOUND
Description Valid configuration on disk not found.
Cause
No physical disk contains a valid configuration on disk area.
Physical disks were never written with a configuration on disk.
Physical disks were replaced while the controller system was offline.
Action If you expected the configuration on disk, investigate.
Address ctl: 0
Severity 4 (Information)
Source ExPro
809 Name MLXEV_CFG_COD_LUN_MAP_NOT_FOUND
Description Valid SANMap was not found in the configuration on disk.
Cause
No physical disk contains a valid SANMap in the configuration on disk
area.
Physical disks from a system that did not use SANMapping may have
been installed.
Action If you expected a valid SANMap, investigate.
Address ctl: 0
Severity 4 (Information)
Source ExPro
Table 2 RAID Controller Event Codes