Adaptec MAN-00005-UG, Инструкция по установке и эксплуатации

Страница: 153 / 237

154 Spheras Storage Director Installation and User Guide
159 Name MLXEV_SYSDEV_DATA_FOR_BLOCK_LOST
Description Data for disk block has been lost due to logical drive problem.
Cause
Data retained in RAID cache for a Write-Back Logical Drive cannot be
stored to the physical medium because of logical drive problem.
The logical drive problem might be caused by multiple physical
medium errors, multiple physical devices offline, or other reasons.
Action Ensure that all the physical disks related to the logical drive, disk
channel, enclosure, or cabling are functional and accessible. Repair or
replace them if necessary.
Address ctl: 0 logdrv: 15
Severity 2 (Error)
Source InP_old
160 Name MLXEV_SYSDEV_OFFLINE_DEVICE_MADE_AVAILABLE_WIT
H_DATALOSS
Description Temporary-Offline RAID5/RAID3 array is available to the user again
with the possibility of data loss in the array.
Cause Temporary-Offline state caused by transient errors on physical disks.
Action Verify data from backup.
Address ctl: 0 logdrv: 15
Severity 2 (Error)
Source InPro
161 Name MLXEV_SYSDEV_OFFLINE_DEVICE_MADE_AVAILABLE
Description Temporary-Offline RAID0+1/RAID1/RAID0/JBOD array is available
to the user again.
Cause Temporary-Offline state caused by transient errors on physical disks.
Action None
Address ctl: 0 logdrv: 15
Severity 2 (Error)
Source InPro
162 Name MLXEV_SYSDEV_STANDBY_REBUILD_START
Description A standby rebuild has started on logical drive.
Cause
A physical disk failed and a spare disk was available.
Action None
Address ctl: 0 logdrv: 15
Severity 4 (Information)
Source InPro
176 Name MLXEV_SYSDEV_BG_INIT_STARTED
Description Logical drive background initialization started.
Cause
User may have started background initialization.
Firmware may have automatically started background initialization.
Action None
Address ctl: 0 logdrv: 15
Severity 4 (Information)
Source ExPro
177 Name MLXEV_SYSDEV_BG_INIT_STOPPED
Description Logical drive background initialization stopped.
Cause
User may have stopped background initialization.
Firmware may have automatically stopped background initialization.
Action None
Address ctl: 0 logdrv: 15
Severity 4 (Information)
Source ExPro
Table 2 RAID Controller Event Codes