Adaptec MAN-00005-UG, Инструкция по установке и эксплуатации

Страница: 49 / 237

50 Spheras Storage Director Installation and User Guide
addresses. If you do not know the IP addresses of the controllers or the controller does not have an IP address, see 8
Select IP settings on page 85 for information on how to set up IP addresses.
• Dynamic discovery of controllers - allows the server to automatically discover all controllers that share its
subnet.
• iHosts file (default) - only the IP addresses of the controllers that are listed in the iHosts file will be discovered.
See 3.7 Editing the iHosts File on page 52.
Note: If a controller is connected to a host with both Fibre Channel and Ethernet (TCP/IP) connections, the Ethernet
connection takes precedence and the Fibre Channel connection is not used.
6 Click OK or press the Enter key. The new server appears in the navigation area.
Notes:
• When you log onto a server, your access is based on the user group in which you belong. To view or change
security options, you must be connected to that server.
• If you are using the dynamic discovery feature over a large network that contains numerous controller-based
storage subsystems, the Spheras Storage Director interface may take a long time before the screen allows input
from the user. Some of the reasons for the long delay include busy controllers and the available bandwidth on
the network.
3.4.2
Changing Properties of Existing Servers
To change the properties of an existing server:
1 Select a server from the navigation area or the content area.
2 Click one of the following items:
From the menu bar, click Server->Properties
From the tool bar, click Properties
Right-click on the server and select Properties
3 Assign a group for each access level.
Grant Administration/root access to the Administrators group.
Grant Maintenance/adm access to the Operators group.
Grant User/users access to the Users group.
4 Select the type of Out of Band Controller Discovery that you want Spheras Storage Director to use. See step 5 in
3.4.1 To define a new server: on page 49.
Notes:
• When you log onto a server, your access is based on the user group in which you belong. To view or change
security options, you must be connected to that server.
• If you are using the dynamic discovery feature over a large network that contains numerous controller-based
storage subsystems, the Spheras Storage Director interface may take a long time before the screen allows input
from the user. Some of the reasons for the long delay include busy controllers and the available bandwidth on
the network.
• If a controller is connected to a host with both Fibre Channel and Ethernet (TCP/IP) connections, the Ethernet
connection takes precedence and the Fibre Channel connection is not used.
3.4.3
Deleting a Server
Deleting a server, results in loss of the ability to manage any controllers that are visible to that server. Deleting a server
also removes it from any server groups of which the server is part. Data that resides on the server is not affected; only
the ability to manage controllers that are visible from the server is affected.