Adaptec MAN-00005-UG, Инструкция по установке и эксплуатации

Страница: 93 / 237

94 Spheras Storage Director Installation and User Guide
Figure 64 Manual Storage Configuration
To create a disk array, perform the following:
Spheras Storage Director automatically creates an array for you. The new array (New Array 1) is displayed in the tree
node.
From the Physical Drives pane, select a physical drives to add to the array. Click Add to Array (or drag and drop). The
physical drives are displayed in the tree node under the selected array.
Repeat steps 1-3 until you have the desired amount of disks in your array. If necessary, you can also create an additional
array and add disks to the new array.
If you want to manually configure a hot spare, select an available physical drive and click Make Hot Spare (or drag and
drop to the Hot Spare node). The hot spare drive is displayed in the tree node under the Hot Spares node.
Note: Before creating a hot spare, the Spheras Storage Director checks the size of the un-configured drive to ensure
that it is large enough relative to the other configured drives on the controller. If the un-configured drive is not
at least as large as the smallest configured drive that is allocated to an array on that controller, a warning
message is displayed. In this situation, existing hot spares are not considered to be configured.
Click View to toggle between the physical view and the text view of the physical drives.