Adaptec MAN-00005-UG, Инструкция по установке и эксплуатации

Страница: 17 / 237

18 Spheras Storage Director Installation and User Guide
The Spheras Storage Director software is not designed to support the connection of multiple servers to a single storage
subsystem. While it is possible to connect multiple servers to a single storage subsystem, this configuration can cause
communication problems that affect the Spheras Storage Director software. In contrast, a single server can be connected
to multiple storage subsystems.
The Spheras Storage Director software is a based upon a classic client/server model. Therefore, a path to the Server
must be open for the Client to properly initialize. Failure to establish this path causes the Spheras Storage Director
Client to hang waiting for communication with the Server. See your system administrator for details.
2.2 Installing the Spheras Storage Director Server and Client
After verifying the pre-installation requirements, you are ready to install the Spheras Storage Director Server
component, the Client component, or both components. The same InstallShield Wizard is used to install both
components. Install files for each of the supported operating systems are provided on the CD ROM that is shipped with
your system.
2.2.1
Starting the Install Process
Note: You must install one of the supported HTTP servers before installing the Spheras Storage Director Server. (For
a list of the supported HTTP servers, 1.4.3 Spheras Storage Director Requirements on page 15.
The program that is used to start the install process depends on the operating system that is used on your system. To
proceed, select one of the following sections:
•
Windows
•
Linux
•
Solaris-SparcWindows
Insert the Spheras Storage Director CD-ROM into your CD-ROM drive.
Click Start->Run and type the path of the setup file or click Browse to locate the following setup file:
x:\ssd\win\setup.exe
Where x represents the drive letter of your CD-ROM drive.
Click OK. The InstallShield setup window opens followed by the Spheras Storage Director Installer welcome window.
Proceed to 2.3 Server and Client Installation Procedures on page 19.
2.2.1.1 Linux
You need to be in the Desktop Environment (KDE or Gnome) to install Spheras Storage Director Server with Linux. To
install the Spheras Storage Director Server with Linux, follow these steps:
1 Open your desktop environment from the command line by typing:
startx
Note: For demonstration purposes, the K Desktop Environment (KDE) was used in this procedure.
2 Insert the CD-ROM into your CD-ROM drive.
3 Login as root.
4 Mount the CD:
mount /dev/cdrom /mnt/cdrom