Adaptec MAN-00005-UG Скачать руководство пользователя страница 122

Страница: 122 / 237

123

•

The host access of each logical drive.

•

The capacity or each logical drive.

•

The status of each logical drive.

•

The RAID level of each logical drive.

•

Whether write back cache is enabled or disabled for each logical drive.

•

The stripe size of each logical drive.

•

The array number where each logical drive resides.

Click on an individual logical drive to view its information.

6.6

Monitoring an Enclosure

To monitor activities on an enclosure, select an enclosure from the navigation area. There are three ways to view
enclosure information.

•

Select the

Enclosures

icon in the navigation area and view the information in the content area

•

Select an individual enclosure in the navigation or content area and view the information in the content area

•

Click

Enclosure->Properties

from the menu bar.

Figure 92

Displaying Enclosure Information

If you are displaying the information using the

Enclosures

icon, the content area displays general information about the

enclosure including name (enclosure ID number), status, type of enclosure, number of slots, and enclosure vendor. The
enclosure status that is reported is the most severe status of the enclosure itself or of the enclosure elements.

To view information about an individual enclosure, select an individual enclosure in the navigation area.

Содержание MAN-00005-UG














































































































































































































































Результаты поиска

Содержание MAN-00005-UG

Отзывы:

Похожие инструкции для MAN-00005-UG

Бренды по названию

Популярные бренды

Adaptec MAN-00005-UG, Инструкция по установке и эксплуатации

Результаты поиска

Содержание MAN-00005-UG

Отзывы:

Похожие инструкции для MAN-00005-UG

Бренды по названию

Популярные бренды