6-5
Installing the HostRAID Driver for Windows NT 4.0
Boot Order In Windows NT 4.0 versus RAID Management
During Windows NT 4.0 installation, Windows NT 4.0 does not
show the devices in the boot order. Instead, it shows the arrays
with the lower ID first. To minimize confusion during
Windows NT 4.0 installation, try one of the following:
■
Disconnect all devices other than members of the boot array, so
that only one logical device is present in the Windows NT 4.0
installation. Reconnect all other devices after Windows NT 4.0
is successfully installed.
■
Configure the boot array in the system BIOS or with SCSISelect
so that the lowest ID is a member of the boot array.
U320 UG.book Page 5 Tuesday, September 23, 2003 1:47 PM
