Adaptec 2060100, Руководство пользователя

Страница: 53 / 206

3-12
Adaptec Ultra320 SCSI Cards User’s Guide
Changing Configuration Settings
The factory default settings for the Adaptec SCSI Card are correct
for most computers. However, if you need to change the settings
for the SCSI card or a SCSI device:
1 If you have not yet installed the SCSI card and the SCSI devices,
do so now. Refer to your SCSI card Installation Guide for details.
2 Start SCSISelect. See Starting SCSISelect on page 3-3 .
SCSISelect detects all Adaptec SCSI cards and displays the
model number, channel letter, slot number, and PCI address for
each card and channel. Channels are listed separately.
3 Select a channel and press
Enter
.
4
The Options menu appears. Select Configure/View SCSI
Controller Settings
. (For details on Using SCSI Disk Utilities , see
page 3-16 .)
Adaptec SCSISelect(TM) Utility vX.XX
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (*=default)
39320A A at slot 6, 00:0E:00
39320A B at slot 6, 00:0E:01
Adaptec SCSISelect(TM) Utility vX.XX
<Arrows> move cursor, <Enter> accept option, <Esc> exit (*=default)
Would you like to configure the SCSI controller, configure
HostRAID settings, or run the SCSI disk utilities? Select
the option and press <Enter>.
39320A at slot 6, 00:0E:00
Options
Configure/View SCSI Controller Settings
SCSI Disk Utilities
U320 UG.book Page 12 Tuesday, September 23, 2003 1:47 PM