F-6
Adaptec Ultra320 SCSI Cards User’s Guide
9
Click on the path
D:\drivers\windows\win32bit
or
D:\drivers\windows\win64bit
(where
D
: is the CD-ROM drive letter).
10
Click on the adpu320, then click Open.
11
Click OK.
12
Scroll down the list and select your Adaptec Ultra320 SCSI
driver, then click Next.
13
Click Next again. You may be prompted with this warning
message:
“The software you are installing for this hardware...has not passed
Windows Logo testing to verify its compatibility with Windows XP...”
Ignore the warning and click Continue Anyway.
14
When the driver is copied on the hard disk drive, click Finish.
15
You will be prompted to restart the computer. Select Yes.
The new Adaptec Ultra320 SCSI driver will be displayed under
SCSI and RAID controllers in the Device Manager.
Disabling HostRAID Support
After installing the Adaptec Ultra320 SCSI driver, you must disable
HostRAID support before you can use the standalone SCSI.
Warning:
Before you disable HostRAID, for RAID 1, you must
break a RAID 1 array. See the following steps for instructions.
For RAID 0, you will loose all your data if you try to disable
HostRAID.
To disable HostRAID, follow these steps:
1
Press Ctrl+A keys simultaneously when the Adaptec BIOS
appears.
2
When your SCSI Card appears, press Enter.
If you are using a dual channel card, select Channel A, then
press Enter.
3
On any channel containing an array, scroll down and select
Configure/View HostRAID Settings
.
U320 UG.book Page 6 Tuesday, September 23, 2003 1:47 PM
