F-1
F
Migrating from HostRAID
to Adaptec Ultra320 SCSI
In this Appendix...
If after installing the HostRAID drivers, you decide to use your
controller as standalone SCSI without RAID functionality, you
must disable HostRAID and install the SCSI drivers. To use
standalone SCSI on your Adaptec SCSI Card, refer to the following
sections of this appendix.
Caution:
Adaptec recommends that you back up all of your
data before migrating from HostRAID to Ultra320 SCSI.
Warning:
Adaptec recommends that if you want to migrate to
standalone SCSI, you migrate from RAID 1 only. If you try to
migrate from RAID 0, you will loose all of your data. See
Disabling HostRAID Support on page F-3
for more information.
!
U320 UG.book Page 1 Tuesday, September 23, 2003 1:47 PM
