3-3
Configuring the Adaptec SCSI Card with SCSISelect
Starting SCSISelect
To start SCSISelect:
1
Turn on or restart your computer.
During the startup process, pay careful attention to the
messages that appear on your screen.
2
When the following message appears on your screen, press the
Ctrl-A
keys simultaneously (this message appears for only a
few seconds):
Press <Ctrl><A> for SCSISelect (TM) Utility!
3
Select SCSI Channel A or B.
4
From the menu that appears, use the arrow keys to move the
cursor to the option you want to select, then press Enter.
Display <Ctrl> <A> Messages during
BIOS Initialization
[Auto-sync]
Enabled, Disabled Enabled
Extended INT 13 Translation for
DOS Drives > 1 GB
Enabled, Disabled Enabled
Post Display Mode [Auto-sync]
Verbose, Silent,
Diagnostic
Verbose
SCSI Controller INT 13 Support
Enabled
Disabled: Scan
Bus
Disabled: Not Scan
Enabled
Domain Validation
Enabled, Disabled Enabled
Support Removable Disks Under
INT 13 as Fixed Disks
Disabled,
Boot Only,
All Disks
Disabled
BIOS Support for Bootable CD-ROM
HostRAID Options:
HostRAID
Enabled, Disabled Disabled
1
Setting is valid only if Multiple LUN Support is enabled.
2
Settings are valid only if host adapter BIOS is enabled.
SCSISelect Options
Available Settings
Default Setting
U320 UG.book Page 3 Tuesday, September 23, 2003 1:47 PM
