B-4
Adaptec Ultra320 SCSI Cards User’s Guide
[xxxxx089] Unable to allocate memory
This indicates that there may be a problem with the amount of
memory installed in your system. Verify that your system has at
least the minimum amount of memory required by your operating
system.
[xxxxx096] Adapter hardware initialization failure—possible resource conflict
The driver has attempted to initialize the adapter hardware but
failed. This might suggest that an adapter resource (for example, an
IRQ) conflicts with another board installed in your system.
[xxxxx097] Unable to allocate memory
This indicates that there may be a problem with the amount of
memory installed in your system. Verify that your system has at
least the minimum amount of memory required by your operating
system.
[xxxxx0af] Unable to de-allocate memory that was allocated for a target device
Normally, this is not a serious problem, unless you get this message
frequently over a short period of time. The memory can be
reclaimed by rebooting the system.
[xxxxx0ce] Scatter/Gather limit exceeded
An I/O request packet from the system contained a Scatter/Gather
element list that contained more elements than are supported by
the miniport. Scatter/Gather is a list of data segments that define
the entire data transfer. Scatter/Gather is a means to improve total
data throughput. This error might be caused by a component
external to the miniport driver, such as the operating system or an
ASPI application.
[xxxxxd4] Adapter hardware failure - adapter reset
The host adapter hardware failed and the miniport driver has to
reset the hardware.
[xxxxx0d6] Internal driver error
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site.
U320 UG.book Page 4 Tuesday, September 23, 2003 1:47 PM
