4-3
Using the SCSISelect Utility to Manage Arrays
4
From the Options menu, select Configure/View SCSI
Controller Settings
and press Enter.
5
From the Configuration menu, select HostRAID and press
Enter
.
6
From the HostRAID Pop-Up menu, select Enabled.
Note:
For information on Configuring SCSI Controller
Settings or using SCSI Disk Utilities, see the SCSI
controller hardware documentation.
Adaptec SCSISelect(TM) Utility vX.XX
<Arrows> move cursor, <Enter> accept option, <Esc> exit (*=default)
Would you like to configure the SCSI controller, configure
HostRAID settings, or run the SCSI disk utilities? Select
the option and press <Enter>.
39320A at slot 6, 00:0E:00
Options
Configure/View SCSI Controller Settings
SCSI Disk Utilities
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (*=default)
SCSI Bus Interface Definitions
SCSI Controller ID ........................................ 7........
SCSI Controller Parity ....................................Enabled
SCSI Controller Termination ...........................Automatic
Additional Options
Boot Device Configuration.............................. Press <Enter>
SCSI Device Configuration .............................Press <Enter>
Advanced Configuration Options .....................Press <Enter>
HostRAID.......................................................Disabled
<F6> - Reset to SCSI Controller Defaults
Adaptec SCSISelect(TM) Utility vX.XX
39320A at slot 6, 00:0E:00
Configuration
BIOS Information
Interrupt (IRQ) Channel.................................10
I/O Port Address............................................FC00h, F000h
U320 UG.book Page 3 Tuesday, September 23, 2003 1:47 PM
