4-14
Adaptec Ultra320 SCSI Cards User’s Guide
3
You will get a message asking if you want to automatically fix
errors. Press Yes to AutoFix. This will execute a comparison of
mirrored drives, a copy from the primary drive to secondary
drive when miscompare occurs, and a report at the end of the
verification process.
If you select No, Verify will execute a comparison of mirrored
drives, a log of errors, and a report at the end of the verification
process.
Note:
To fix errors found (if any), run Verify again with
Autofix=Yes
.
After you select your verification option, the following message
appears:
Depending on your disk capacity, verifying may take several
minutes to several hours. Are you sure?
4
When your Verify is completed, you will get a verification
message and log. Press Esc to exit.
If your Verify is unsuccessful, you will get the following
message:
WARNING: Failed !!!
5
Press Enter and you will return to the Main menu.
U320 UG.book Page 14 Tuesday, September 23, 2003 1:47 PM
