10-3
Installing the SCSI Driver for Novell NetWare
Installing the Driver When NetWare is Already
Installed
To update or install the
adpu320.ham
driver when NetWare is
already installed, follow the instructions in this section. The
procedures are similar for all versions of NetWare. Procedures that
are specific to a NetWare version are noted when necessary.
1
Make a backup copy of the old driver (if it exists) before
installing the new driver.
2
Copy the
adpu320.ham
driver from the Ultra320 FMS driver
floppy disk for NetWare into the server’s startup directory (for
example,
c:\nwserver, c:\server.40
) on your hard disk. This
overwrites any existing version of the driver in the directory.
3
If necessary, modify the
load
command line in the
startup.ncf
file
so that the proper path to the driver and all appropriate
command line options are specified. See
The correct syntax to load the Ultra320 driver is:
load [pathname]adpu320 [options]
Command line options are not case sensitive. Placing spaces
between command line options is required. See
Driver at Server Bootup on page 10-4
for possible values.
U320 UG.book Page 3 Tuesday, September 23, 2003 1:47 PM
