11-12
Adaptec Ultra320 SCSI Cards User’s Guide
Error Messages
The error messages listed below are the messages associated with
the drivers. Messages are listed sequentially according to the last
three digits of the error code. For example, [xxxxx020], [xxxxx021],
[xxxxx022], and so forth.
Note:
When reporting problems to Customer Support, be sure
to include the complete error code in your problem
description.
[xxxxx003] Command completed with error
[xxxxx004] Command completed with error
[xxxxx005] Command completed with error
[xxxxx006] Command completed with error
[xxxxx007] Command completed with error
[xxxxx008] Command completed with error
[xxxxx009] Command completed with error
A request issued to a target device completed with an indication
that there is an error. In most cases, the error is recovered and
normal operation continues.
[xxxxx010] Error issuing command
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site.
[xxxxx011] Error issuing command
The requested command is not supported by this driver.
[xxxxx012] Error issuing command
The driver does not recognize the target device.
[xxxxx013] Error issuing command
[xxxxx014] Error issuing command
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site.
[xxxxx015] Error issuing command
An error has occurred with the driver. Try installing the most up-
to-date version of the driver available from the Adaptec Web site.
U320 UG.book Page 12 Tuesday, September 23, 2003 1:47 PM
