B-2
Adaptec Ultra320 SCSI Cards User’s Guide
3
Click the Words option.
In the Data section of the dialog box, the entry in the second row
and second column (to the right of the 0010: entry) lists the error
message generated by the driver. The common error messages for
the driver are described in
Note:
The entry in the third row of the last column identifies
the SCSI ID of the device originating the error.
Driver Error Messages
The following error messages are listed sequentially according to
the last three digits of the error message. For example, [xxxxx010],
[xxxxx011], [xxxxx012], and so on.
Note:
When reporting problems to Customer Support, be sure
to include the complete error message in your problem
description.
[xxxxx004] Command completed with error
[xxxxx005] Command completed with error
[xxxxx006] Command completed with error
A request issued to a target device completed with indication that
there is an error. In most cases, the error is recovered and normal
operations continues.
[xxxxx010] Error issuing command
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site.
[xxxxx011] Error issuing command
The requested command is not supported by this driver.
[xxxxx012] Error issuing command
[xxxxxx99] Error issuing command
The driver does not recognize the target device.
U320 UG.book Page 2 Tuesday, September 23, 2003 1:47 PM
