Adaptec 2060100, Руководство пользователя

Страница: 127 / 206

11-6
Adaptec Ultra320 SCSI Cards User’s Guide
4 Type
mail
and press Enter. The mail messages tell you if the
installation was successful.
If a mail message informs you that the installation has failed,
turn to
Troubleshooting on page 11-11 .
5 Type
pkginfo -l adpu320
and press Enter.
6 Verify that the
adpu320
driver is now listed.
If the
adpu320
driver does not appear in the pkginfo listing, turn
to Troubleshooting on page 11-11 .
The listing should be similar to
PKGINST: adpu320
NAME: Ultra320 Driver for UnixWare 7.1.1
Modify the New System File
1 Display the contents of the UnixWare/Open Unix file by typing
the following and pressing Enter:
cat /etc/conf/sdevice.d/adpu320
2 If your computer is to boot from a device connected to a Ultra320
host adapter, verify that the line
$static
is present immediately
below the line
$version 2
.
3 If your computer is not to boot from the host adapter SCSI bus,
and you wish to leave the driver as a loadable module, edit and
verify that the line
$static
is not present directly below the line
$version 2
.
Rebuild the UnixWare/Open Unix Kernel
To rebuild the UnixWare/Open Unix kernel with the new changes:
1 Type the following at the # prompt and press Enter after each
line:
cd /etc/conf/bin
./idbuild -B
Status messages appear.
U320 UG.book Page 6 Tuesday, September 23, 2003 1:47 PM