11-5
Installing the SCSI Driver for UnixWare, OpenServer, and Open Unix
Back Up the Kernel
If you have not already done so, back up all important files on the
computer. See your UnixWare/Open Unix documentation for
proper UnixWare/Open Unix file system backup procedures.
1
Log in as
root
at the UnixWare/Open Unix # system prompt.
2
To back up the old UnixWare/Open Unix kernel, type the
following and press Enter:
cp /stand/unix /stand/unix.work
Load the Package
To load the driver:
1
At the system prompt, type the following and press Enter:
pkgadd -d diskette1
Follow the instructions on-screen to insert the IHV HBA disk
(or Ultra320 driver disk for UnixWare/Open Unix) into the
boot floppy disk drive.
2
Select the adpu320 package from the on-screen menu and press
Enter
. The package is loaded into your UnixWare/Open Unix
operating system.
3
When the package has loaded, you may be prompted to install
the disk again.
Do not reinsert the IHV HBA disk (or Adaptec Ultra320 driver
disk for UnixWare/Open Unix). Instead, type
q
(quit) and press
Enter
.
U320 UG.book Page 5 Tuesday, September 23, 2003 1:47 PM
