manualshive.com logo in svg

ACO Powerlift Concrete, Инструкция по эксплуатации

Поделиться
Скачать
ACO Powerlift Concrete Скачать руководство пользователя страница 28

Installation

28/ 122

Powerlift prefabricated pumping station

Supporting rings

Supporting rings can be installed between the cover and the cover plate to adjust to the 
upper level of the terrain on site. Supporting rings with construction heights from 40 to 
100 mm can be optionally purchased from ACO.

IMPORTANT

 Compensate out maximum. 300 mm of height difference with supporting rings.

 

Î

Insert the supporting ring into the 
"retainer".

Cover

IMPORTANT

 

 

■

Before the cover is installed the excavation fit must be backfilled up to this level, 

 Chapter 3.3.11 "Backfill pit".

 

■

Release  and approval for traffic is only permitted after an adequate bonding time has 
passed, once the mortar has reached a compressive strength of at least 10 N/mm². 

 

■

When installing in asphalt surfaces, it is not permitted to tar over the cover.

Specifications:

 

■

Installation, 

 product-accompanying documentation: Instruction "Multitop manhole 

cover".

 

Î

Clean and moisten the sliding rebate of 
the cover plate and/or the supporting 
ring and the underside of the cover.

 

Î

Insert the cover in the "retainer" and 
align.

Содержание Powerlift Concrete



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды