ACO CDNP6ACC, Инструкция пользователя

Страница: 7 / 68

7
Additional numbers can assigned to the same uniphone so that it can be called
using three different numbers (for instance two additional numbers and one
primary number). Each such additional number may be configured with different
ringing parameters (ring tone, volume, number of signals). If the primary numbers
and additional numbers overlap, the latter have priority and calling in these cases
is always made according to their settings. Individual access codes for opening
are the codes in the table, corresponding to physical addresses of uniphones (set
in uniphone jumpers).
The unit detects a short-circuit of uniphone lines - displaying the flashing " LineEr
”
message. During this time, E-lock can be activated by pressing any button and
building can be exited. When the correct state of the line is detected (when short
circuit ceases), the unit is automatically restored to normal operation.
An additional CDN I/O expansion module can be connected to the unit. It features
2 NO, NC relay outputs and two inputs activated by short circuit to ground. It can
be used to control lights in the hallway or open an additional gate, etc.
The unit features an output for direct connection of a standard E-lock or reversible
E-lock - in case of CDNP6. Use CDN-PK relay module to connect another device
in place of the E-lock.
The door can be opened:
1. With the “key” button on receiver
in the apartment
The door will open upon pressing the opening button ("key") on the receiver.
Typically, the door can be opened
only during connection (conversation). During
one connection the door can opened three times (that together with enabling the
second output - F2), after which the connection will terminate automatically (the
parameter can be set to: 1, 2 or 3). The door can also be opened without having
to connect with the apartment - refer to the I/O module settings in the computer
program for details. In this case, on classic uniphones the handset must be picked
up and the open button pressed three times, on active receivers (INS-UP720MR,
UP800/MP800, INS-MPx) the open button must be pressed once.
2. With user’s access code
Use the unit keypad to select the apartment number, confirm with the " key " button
and enter the four-digit entry code for the apartment. The entry code is unique for
each apartment and can be easily changed. These codes are provided in tables.
Each table has its unique number, used to generate 255 different access codes
for residents.