ACO CDNP6ACC, Инструкция пользователя

Страница: 10 / 68

10
Control of the built-in second relay OUTPUT:
The OUTPUT exit (CDNP6 Master units only) can be activated upon pressing the
F2 button in the receiver or entering the user code - in which case the "key" button
must be pressed twice before entering the code, which is the same as the basic
access code. Typically, exit is possible only during the connection (conversation).
Exit can also be activated without having to connect with the apartment - refer to
the I/O module settings in the computer program for details.
In this case, on classic uniphones the handset must be picked up and the open
button pressed three times, on active receivers (INS-UP720MR, UP800/MP800,
INS-MPx) the open button must be pressed once.
The response time and functions of the OUTPUT exit can be changed via the
computer program (similar as for port 2 of the CDN-I/O module). The default
response time is 1s. Slave panels must feature an optional CDN-I/O module.
At exit the display shows “
OUT-2
”.
Exit control for individual premises can be disabled.
In units with the ACC proximity reader, the second output can also be activated
without pressing the "key" button and the proximity card or proximity key fob
(resident’s or administrator/installer’s).
The unit detects a short-circuit of uniphone lines - displaying the "
LineEr
”
message. During this time, E-lock can be activated by pressing any button and
building can be exited. When the correct state of the line is detected (when short
circuit ceases), it is automatically restored to normal operation.
Refer to the "Solving common problems" section at the end of this manual for
more information and description of common problems.
IV. DESCRIPTION OF ADDITIONAL AND SPECIAL MODULES
The CDNP door entry units support a great number of additional and special
modules. Additional modules can be added independently (can be purchased as
separate modules).
NOTE! Modules may only be connected with the power supply switched off.
The following module types are available:
230E module - electronic resident list module. Names
(16 characters in the top line and 11 in the bottom line)
are arranged alphabetically and can be viewed on the
LCD display using two buttons. It only displays
apartments with assigned tags (names). Pressing the
bell button activates calling the name being displayed.