ACO CDNP6ACC, Инструкция пользователя

Страница: 44 / 68

44
When the parameters have been saved correctly, " Ready " will appear on the
display.
By default, all values are set to zero, meaning all zones and additional numbers
are inactive.
P11 ENTERING NEW ACCESS CODE TABLE
Tabel
This program is used to enter the four-digit number of the code table, used by
the unit to generate 255 individual access codes for residents. In systems with
multiple units (Master / Slave), by entering the same number of the code table in
each unit, the same access codes for residents are set across the whole
system.
After entering the program, the display shows the current code table number.
Then the display backlight starts blinking and the new table number can be
entered. Pressing the "#" key exits the program without saving the changes. When
a new table number is entered, the procedure of generating new access codes
will be initiated and codes will be stored in the memory. Then "
Gotowe " will be
displayed.
When this operation is completed, the access codes assigned to apartments will
change to those in the new table. The installer password remains unchanged
(change it in P7).
The code table for Master panels is a 4-digit number, which can be found on the
back of the unit. The code table for Slave panels must be the same as the for
Master panels. Order numbers in the code table (1 to 255) always correspond to
the physical addresses in the uniphones (irrespective of shifts and other settings).
The function of opening with an access code can be disabled by entering the code
table number "9999".
P12 SELECTING THE FUNCTION OF THE AUXILIARY INPUT
Input
This program is used to set the parameters for the function of the auxiliary input.
The unit features an additional input, which by means of an optional button can
be used for activating E-lock (also with a delay) or for direct calling to apartments.
The INPUT terminals, located on the unit board, can be used to connect any "NO"
contacts - for example, an external NO pushbutton ("bell" type). The input is
protected against permanent closing.