ACO CDNP6ACC, Инструкция пользователя

Страница: 52 / 68

52
P18 PARAMETERS OF "CDN-
I/O” ADDITIONAL INPUT-OUTPUT MODULE
InOut
This program is used to set the
parameters for the CDN I/O module
(module extending inputs and outputs of
the unit).
The I/O module features two ports, P1
and P2. Each port has one input (shorted
to ground for setup) and relay output (NO
and NC contacts with maximum load 2A
for 30VDC or 1A for 125VAC).
By default both ports are disabled.
This program is used to change the input and output settings of both ports
independently. To configure each input it is necessary to provide one parameter
(function number), and to configure each output it is necessary to provide two
parameters (output switching time and function number).
General description of the function:
The inputs of both ports can be used independently:
- E-lock activation (calling the opening procedure)
- apartment calling
The outputs of both ports can be used independently:
- output activation for a pre-set time after setting the input of the same port
- output activation a pre-set time before each E-lock activation
- the output is activated for a pre-set time after the second F2 button is pressed
on the uniphone during an active call (only the Inspiro and UP720M uniphones
and all video display unit models), or when opening is called using additional code
or card.
- output activation for a pre-set time when any keypad button or additional
modules are pressed
- CDNP6 only: the output is activated for the pre-set time after the release button
is pressed three times on the uniphone (only on Inspiro and UP720M uniphones),
without making a call.
- CDNP6 only: E-lock activation (call opening procedure) after pressing the door
opener button three times in the uniphone, without having to make a call and
without having to connect the CDN I/O module.