ACO CDNP6ACC, Инструкция пользователя

Страница: 36 / 68

36
P5 SERVICE UNIPHONE CALL FROM APARTMENT
SfCal
The option of service uniphone call from apartment is activated during the system
installation. With this option the installer can self-check if the uniphone works OK
(ringing, broadcast channel and opening) directly from the apartment.
The procedure is as follows: after pressing the uniphone opening button three
times, with the handset lifted, the unit starts searching for the uniphone with lifted
handset, selecting numbers in sequence (within the “
From " -
“
To " range set in
P9). When the uniphone is found, it will be confirmed by a triple beep heard in the
handset, then the handset is to be hanged up and after a short moment the unit
will automatically call this uniphone (its number will appear on the display). After
answering the call the uniphone operation can be checked.
After entering the program "
Nbr ? " will be displayed, after which the user enters
a single uniphone number to be checked (the function is active for approx. 30
minutes), or enters "
0 " for automatic search of uniphone with lifted handset within
the “
From " -
“
To " range set in P9 (the function is active for approx. 4.5 hours).
The " key " button will confirm the entered digit, the "#" button will exit the program.
When this function is active, normal operation of the system and the unit is
possible, and the display shows "
_ _ _
" in place of “Intro".
The function of calling the uniphone from apartment works only for the Master unit
and can be deactivated at any time by running the P0 program - service activation
of E-lock.
Now
the value “
Nbr ?
” is the new call number, to be selected with the keypad,
since the unit operates as per the settings in P9 (offset, range) and automatically
calculates the uniphone physical address.
Function may not work properly with some uniphones of other manufacturers such
as: 1131/520, 1132/520 MATIBUS Urmet etc
P6 SETTING THE E-LOCK TIME
LTime
This program can be used to set the E-lock time (lock opening time) from the
range of 1s to 10s and E-lock delay time from the range of 0s to 250s.
Each time this program is accessed, the " service E-lock activation function
” is
enabled, which is useful for E-lock resetting or installation. The function of E-lock
service activation is available after exiting the installer's programming and is
signalled on the display with the
" "
sign in place of “Intro".