ACO CDNP6ACC, Инструкция пользователя

Страница: 4 / 68

4
CDNP housing is made of aluminium alloy to ensure effective protection against
devastation and weather conditions. CDNP units are easy to operate, functional,
their installation is simple and are adaptable to the changing requirements of
contemporary housing construction.
CDNP digital door entry units can be expanded to complex multi-entry systems
that combine a number of units, for instance residential estates with access
control, gate house, main gate, building entrances etc. In practice this makes it
possible to call an apartment both at the entrance to the site as well as the
entrance to a building or staircase. Their other advantage is the possibility to
individually program the ringing parameters for each apartment, by choosing one
of the four available signals and signal repetition in the ringing cycle. With two
pre-programmed additional numbers it is possible to call one uniphone using three
different numbers (each with different ringing settings), such as in a tenement
house where one uniphone is used by several apartments on the same floor. The
units, with connected additional CDN-ACC module, also support door opening
using proximity cards and RFID key fobs (in Unique 125 kHz standard). Series "6"
units are also available with internal, built-in proximity key reader - the
CDNP6ACC version.
The control unit can also support control of an additional gate, etc., from uniphone
(button F2), by means of individual resident codes or proximity cards/key fobs (for
CDNP6 series master panels by means of built-in second relay output, for slave
panels by means of an optional CDN-I/O input/output module). With CDN-USB
cable and corresponding "CDNP" or "ACC" software (for key fob management by
CDNP6ACC) downloaded free of charge from
www.aco.com.pl , it is possible to
program settings, create backups and transfer settings to other units. For detailed
information on the operation and capabilities of CDNP units refer to this manual.
Their other advantage is the possibility to individually program the ringing
parameters for each apartment, by choosing one of the four available signals,
signal repetition in the ringing cycle, door opening signal and automatic opening.
With eight programmed additional numbers it is possible to call one uniphone
using many different numbers (each with different ringing settings), such as in a
tenement house where one uniphone is used by several apartments on the same
floor.
Door entry units feature one built-in input activated by short circuit to ground. It is
used to connect an external “doorbell" button, such as INS-OB.
The default operating mode is direct opening of the door (E-lock activation) - for
instance when leaving the staircase. It is also possible to set door opening delay
or switch to direct call mode.