ACO CDNP6ACC, Инструкция пользователя

Страница: 6 / 68

6
- illuminated description window modules: 5mA

Permitted load of E-lock output: 1A (0.5A for reversible)

Permissible load - second output (relay): 2A, 30VDC;

Maximum line length: Audio 300m*, Video: 70m to last power supply - max
300m* using additional power supplies, (*length for cable cross sections
0.5mm - refer to page 13 for more information)

Housing: powder coated aluminium alloy casting with 3mm hexagon
screws.

Surface mounted unit dimensions: 207 x 90 x 30mm,

External dimensions of the frame for flush mounting: 230 x 110 x 22mm,
(355 x 110 x 22mm with CDN6n/p module, 290 x 110 x 22mm with other
additional modules),

Hole for flush mounting: 215 x 95 x 21mm,

(335 x 95 x 21mm with CDN6n/p module, 275 x 95 x 21mm with
other additional modules),
III. OPERATION
In standby (factory settings) the unit display shows " aco ". Using the P22 software,
this can be changed to any other 6-character inscription or to 6 different screens
(6 characters each) can be entered using a PC, displayed in cycles with a fixed
interval. Heated display (CDNP6 series only) for better readability at low
temperatures.
To call an subscriber, their number must be selected using the keypad (the
number will appear on the display). Within 3 seconds the uniphone in the
apartment will start ringing.
First, the unit sends ringing tones (as set in P3 software - by default 2) and sets
itself to stand by waiting for the handset to be picked up. If the call is not answered
within 20s, another single signal is sent and the unit continues waiting for 20s.
While awaiting for the call to be answered, the display backlighting will blink. If
the uniphone handset of the selected apartment is not picked up within
approximately 40s, standby condition will be automatically cancelled and the
system will switch from calling to standby mode. Calling can be cancelled with the
“#” button.
If the handset of the uniphone is picked up at the apartment during the waiting
time, its connection with the unit will be established. The display will become
brighter. Now conversation is possible and the entry door can be opened. The call
will last approx. 2 minutes unless the uniphone handset is hanged up or the
connection is terminated with the use of the "#" button.
Two additional supported numbers can be added to the unit (program P15). These
can be any number in the range of 1-999, to which physical addresses of
uniphones can be assigned.